Below is the standard system configuration for deploying a Zoom Node server with the Zoom Phone Local Survivability service module.
For information on what devices are supported with the Local Survivability service module, please see the following:
Note: The following configuration should be used when deploying your Zoom Node management server.
Below are the minimum required specifications when configuring a virtual machine for the Zoom Node management server that will have the Zoom Phone Local Survivability service module:
| Configuration item | System Requirement |
|---|---|
| VM Platform |
VMware ESXi 6.7 or higher KVM Hypervisor Nutanix AHV |
| Processor cores per VM host | Intel(R) 3rd generation Xeon(R) or higher (e.g. Intel Silver 4316) |
| Dedicated threads per VM host | 8 cores or higher |
| Memory per VM host | 16 GB or higher |
| Storage space per VM host* | 200 GB or higher |
| Network Interface Card (NIC) speed** | 10 Gbps or higher |
Note: If you require a different configuration, please open a ticket with Support.
*Note: Thick provisioning / Pre-allocation deployment is recommended
**Note: This applies to both virtual and physical NICs.
| Configuration item | Configuration Option 1 | Configuration Option 2 |
|---|---|---|
| Hardware Specs | 8 CPU 16 GB RAM 200 GB HDD | 8 CPU 16 GB RAM 200 GB HDD |
| Total number of registrations | 2000 | 5000* |
| Total number of concurrent calls | 240 calls | 480 calls |
| Calls per second (CPS) | 7 | 12 |
| Registrations per second (RPS) | 45 | 90 |
Note: Performance metrics are based on Intel® Xeon® Silver 4314 CPU @ 2.40GHz. Actual performance may vary depending on your CPU specifications.
*Note: When a site enabled for survivability exceeds its endpoint capacity (5,000 or 2,000, depending on hardware), the ZPLS service module will accept registrations on a first-come, first-served basis up to the maximum limit.
Zoom Phone Local Survivability supports scaling out with additional modules to increase capacity. Learn more about configuring Local Survivability with a Node group.
| Configuration item | Configuration Option 1 | Configuration Option 2 |
|---|---|---|
| Hardware Specs | 8 CPU 16 GB RAM 200 GB HDD | 8 CPU 16 GB RAM 200 GB HDD |
| Total number of ZPLS nodes supported within a node group | 20 | 20 |
| Total number of registrations | 100,000 (5000 per node) | 50,000 (5000 per node) |
| Configuration item | Configuration Option |
|---|---|
| Hardware Specs | 8 CPU 16 GB RAM 200 GB HDD |
| Request per second (RPS) | 25 |