System requirements for the Meeting Connector module

Below is the standard system configuration for deploying a Zoom Node management server with the Meeting Connector module services.

Default configuration

Below are the minimum required specifications when configuring a virtual machine for the Zoom Node management server that will have the Meeting Connector module. These requirements allow for the following:

400 concurrent attendees using Group HD (720p)
Up to 4 deployed modules per Zoom Node

Configuration item	System Requirement
VM Platform	VMware ESXi 6.7 or higher KVM Hypervisor
Processor cores per VM host	Intel(R) Xeon(R) CPU E5-2630 v4 or higher
Dedicated threads per VM host	8 cores or higher
Memory per VM host	16 GB or higher
Storage space per VM host	200 GB or higher
Network Interface Card (NIC) speed	10 Gbps or higher*
Reserved IPv4 addresses	4 internal IPv4 addresses (Zoom Node and the ZC will share the first, and any MMR modules deployed (minimum 1) requires its own unique IP address. Up to 3 public IPv4 addresses if external access is necessary (1 address for every deployed MMR).
Additional network requirements	DNS resolution for external addresses Firewall - 1:1 NAT from external to internal IPs and the appropriate ports open, if external access is necessary. Firewall allows the required destinations and ports.

*Note: This applies to both virtual and physical NIC.

If you require a different configuration, please open a ticket with Support.