Changing the video layout on a SIP/H.323 device

You can change your video layout when joined into a meeting from an H.323 or SIP device. You can also configure a video layout as the default in the H.323/SIP Configuration or change the layout with the dial string. 

Note: H.323/SIP devices can only send and receive video up to 720p, as well as send and receive content up to 1080p. 

Requirements for changing the video layout on a SIP/H.323 device

• Room Connector add-on plan

How to switch video layouts in meeting

1. Press 1 via DTMF tones to access the menu (shown below)
   • Polycom: Press # to activate the keypad for DTMF tones
   • Tandberg: Press # to activate "Touch Tones"
   • Lifesize: Press to toggle between presets and DTMF mode
   • Sony: Press * to activate DTMF mode, Enter to exit (microphone will not be active in DTMF mode)
   • Aver: Press Far/Near button on remote control to toggle between camera presets and DTMF mode
     Note: On some devices, you will need to toggle your remote to send DTMF tones.
2. Press 1 to switch video layout to toggle between Gallery View (2x2, 3x3, 4x4, and 5x5), Full Screen, Thumbnail view.
   • 1 Participant: Active Speaker only
   • 2-4 Participants: 2x2 Gallery view, Active Speaker view, Thumbnail view
   • 5-9 Participants: 2x2 Gallery view, 3x3 Gallery view, Active Speaker view, Thumbnail view
   • 10-16 participants: 2x2 Gallery view, 3x3 Gallery view, 4x4 Gallery view, Active Speaker, Thumbnail view
   • 17+ Participants: 2x2 Gallery view, 3x3 Gallery view, 4x4 Gallery view, 5x5 Gallery view, Active Speaker view, Thumbnail view
3. (Optional) Press 4 or 6 to page between screens if the current Gallery View doesn't show all participants

How to select a video layout in a dial string

The default layout of a meeting is Gallery View, unless you select a different option in your H.323/SIP Configuration. To change the video layout when entering the meeting, you can do the following:

For H.323 devices, enter ##11 at the end of your dial string (#11 if a meeting password has been entered)"

• Format: [IP Address]##[Meeting ID]#[Password]#11

For SIP devices, enter ..11 after the Meeting ID (.11 if a meeting password is entered)

• Format: [Meeting ID].[Password].11@[IP Address]

Entering 11 in the dial string will move to the next video layout option. If you have Gallery View set as the video layout in the H.323/SIP Configuration, entering 11 will toggle to Full Screen and 1111 will toggle to Thumbnail view. If you have a different default selected, it will move to the next video layout, in the order of Gallery, Full Screen, then Thumbnail view. 

See H.323/SIP Room Connector Dial Strings for more information.

Video layouts available for SIP/H.323

Gallery View

Gallery view allows you to see up to 25 participants at a time. Depending on the number of participants, it will do a grid of 2x2, 3x3, 4x4, or 5x5. If you have more than 25 participants,  press 1 to activate the menu and then 4 or 6 to go through additional screens.  

Full Screen

The full screen layout displays the current speaker.

Thumbnail View

Thumbnail view layout mimics the active speaker view from the Zoom desktop client. This video layout will display a large video window with the current active speaker with up to 5 thumbnail videos of other recently active participants below it.