System requirements for the Zoom Node Conference Room Connector Hybrid module

The Zoom Node Conference Room Connector Hybrid module requires a greater amount of system resources than a standard Zoom Node deployment. Also, the CRC Hybrid module must be the only module deployed on a Zoom Node - do not deploy any other modules on the same Zoom Node server with a CRC Hybrid module. If deploying multiple CRC Hybrid modules, each instance must be deployed on its own Zoom Node.

This article covers:

Common requirements for the Zoom Node Conference Room Connector Hybrid module

The table below details the common system requirements for a Zoom Node management server with one (1) Zoom Conference Room Connector Hybrid module.  Refer to the next section for additional system requirements based on capacity.

Configuration itemSystem Requirement
VM Platform

VMware ESXi 6.7 or higher

KVM Hypervisor

Processor typeIntel(R) Xeon(R) CPU E5-2630 v4 or higher
Storage space per VM host

200 GB or higher

Network Interface Card (NIC) speed10 Gbps or higher**
Reserved IPv4 addresses
  • 2 internal IPv4 addresses 
Additional network requirements

System requirements based on capacity for the Conference Room Connector Hybrid module

 

Configuration Option 1

Configuration Option 2

vCPU per VM host

20 vCPU

40 vCPU

Memory per VM host

32GB

64GB

Storage per VM host

200 GB

200 GB

Bandwidth per VM host

16Mbps (aggregate)

32Mbps (aggregate)

Max number of simultaneous calls

Eight (8) calls using 720p or four (4) calls using 1080p

Sixteen (16) calls using 720p or eight (8) calls using 1080p

If you require a different configuration, please open a ticket with Support.